How to perfectly paint the exterior of your house

Painting the exterior of your home with the best exterior paint can cost thousands of dollars when you hire a professional but you can save that money and invest time to do it yourself. Most exterior surfaces such as wood and concrete require protection from a coat of paint. Professionals will charge you up to $6,000 to paint a two thousand square foot two-story property. But you can do it yourself for the cost of supplies and paint. An excellent paint job can last up to 10 years or more. However, to ensure your paint lasts that long, the surface has to be prepared correctly and you have to use high-quality paint. Here are a few tips that will ensure your paint job is perfect.

Remove the lead

If you are painting your home without using the services of a professional, no one will come to you and ensure you are following the available regulations for lead-safe practices. But if your home is older than 1978, you should protect yourself from airborne lead particles. You should start by testing for lead paint. You can purchase test kits online or at the hardware and paint stores. If the tests prove that lead is present then you should do everything you can to keep paint dust to a minimum by laying plastic drop cloths and collecting scrapings, cleaning the area using a HEPA vacuum, wearing masks, and disposing of all materials at an approved site for disposing of hazardous materials.

Wash the exterior

Washing is not for brightening your exterior paint colours but for making the surface suitable for a fresh paint coat. Mildew thrives under fresh paint, which will not adhere well to grimy, dirty, and spore sporting exterior surfaces. You should therefore wash the exterior of your home before painting. You can use a mixture of phosphate-free cleanser and water. You can hand-apply your solution using a sponge but the easiest way to go about it is to hire a professional to pressure wash the siding. Hiring an amateur can damage the siding.

Scrape off loose paint

Remove any flaking paint once clapboards are dry. You can use a handheld scraper since it is the best tool for the job. You can also use an infrared paint stripper or a hot-air gun. Avoid using an open-flame torch, which can start a fire and is illegal in most places unless you have a permit to use it.

Sand rough spots

Random-orbit fitted sandpaper or a pad sander will smooth out remaining rough spots. Be careful not to push so hard to leave sander marks on the surface.

Fill and repair

After scraping, washing and sanding, inspect what you have uncovered including chips, dings, and holes. Fill dings and minor holes in the siding using a patching putty. If you have a major rot issue then summon a carpenter to replace the bad wood.

Apply primer

Before you apply the best exterior paint, you should apply a primer. Tinted, grey or white primer provides an even base to enable the topcoat to adhere to.

Leave a Reply

Your email address will not be published. Required fields are marked *

Do NOT follow this link or you will be banned from the site!